Technical Specifications Edge, Angler, Voyager, Explorer
Product Material Specifications Material Specs unless otherwise noted below. Pro Series Stainless Steel are manufactured from Heat Treated 304 Stainless Steel with a Material Thickness of .104 (less than 1/8") the corrosion resistance is Superior, Finishes include #2B Satin Polished and Black Powder Coated. HF Series Stabilizers are manufactured in 5052 Aluminum and A36 Galvaneal CRS Steel the Material Thickness for Aluminum and CRS Steel is .125 (1/8 inch) Corrosion Resistance for Aluminum is Good but can be subject to Electrolisis, the corrosion resistance for A36 is good unless the powder coating is damaged (which requires maintenance by applying paint over the damage surface), All Colors Of Powder Coating are TGIC Polyester. Tensile Strength of 304 Stainless Steel is 125,000 lbs/square inch, Tensile Strenth of 5052 Aluminum is 25,000 lbs/square inch and Tensile Strength of A36 Steel is 75,000 lbs/square inch. All products supplied with Stainless Steel Mounting Hardware.
Specifications For Edge Pro & Edge HF Series Stabilizers - PRO SERIES STOCK NUMBERS 5475-19 Satin Stainless, 5475-2 Black Stainless - Weight Per Unit 5 lbs - HF SERIES STOCK NUMBERS 1919-21 Aluminum Black, 1919-23 Aluminum White, 1919-25 Aluminum Charcoal - Weight Per Unit 3 lbs - HF SERIES STOCK NUMBER 2919-21 Galvaneal Black - Weight Per Unit 5 lbs - MOUNTING - 3 Screws, Locking Nuts, Washers Each Side Requires Drilling 1/4" Holes (Stainless Hardware Supplied)- This Series Fits Outboards / Inboard/Outboard 75 HP and up, Johnson, Evinrude, OMC Cobra, OMC King Cobra, Mercury, Mariner, Mercruiser, Yamaha, Yamaha I/O, Volvo SX, Honda
Specifications For Angler Pro & Angler HF Series Stabilizers - STOCK NUMBERS 1147-19 Satin Stainless, 1147-2 Black Stainless - Weight Per Unit 4.25 lbs - HF SERIES STOCK NUMBERS 1147-21 Aluminum Black - 1147-23 Aluminum White - 1147-25 Aluminum Charcoal - Weight Per Unit 2 lbs - HF SERIES GALVANEAL 2147-21 Black - Weight Per Unit 4.25 lbs - MOUNTING - 2 Screws, Lock Nuts, Washers On Each Side (Stainles Steel, supplied with unit) - Requires Drilling 1/4" Holes - This Series Fits All Listed Motors 40 HP to 70 HP Johnson, Evinrude, Mercury, Mariner, Yamaha
Specifications For The Explorer HF STOCK NUMBER 5184-21 Aluminum Black - Weight Per Unit 1.25 lbs - MOUNTING - 2 Screws, Lock Nuts, Washers Each Side - Fits All Listed Motors 4 HP to 35 HP Johnson, Evinrude, Mercury, Mariner, Yamaha
Specifications Voyager Pro Satin Stainless STOCK NUMBER 2215-19 - Weight 6.5 lbs per unit - MOUNTING 3 Screws, Lock Nuts, Washers Each Side, Four Forward 2" Bolts Are Drilled Thru The Entire Exhaust Port from the bottom side up (1/4" Holes), REQUIRES NO SPECIAL ADAPTERS OR MOUNTS - This Series Fits Volvo Penta (WITH THRU THE CAVITATION PLATE EXHAUST) Volvo 260, 280, 290, 295, Volvo Duo Prop w/Thru the cavitation plate exhaust.
