Questions before ordering? Check here first! Please use our FAQ page to answer questions commonly asked about CoBra Marine Products and service. You can also find detailed information on the Specifications page in order to assure your complete satisfaction with all of our Boating Accessories...copyright all rights reserved 1991-2016
Q:
How are COBRA MARINE stablizers different from others on the market?
A:
1.) CoBra Marine utilizes the finest materials available in the Marine Industry; these include Hardened 304 Stainless Steel, Galvaneal Cad Plate Alloy, and our Aluminum Alloy Series. Our many options should be considered for your particular boating needs (See our Specifications and Dimensions Page for more technical information). Sadly, Many of Cobra Marine competitors use only plastic materials.
2.) CoBra Marine Stabilizers mount uniquely underneath the cavitation plate as opposed to top and side mounts that create undue stress on the cavitation plate.
3.) CoBra's patented non-areodynamic design creates planing as soon as the prop is in motion, allowing top performance. This patented design puts your boat on plane at speeds as low as 8-10 m.p.h.
5.)
CoBra Marine stabilizers dramatically increase surface area over the cavitation plate; thereby increasing "prop bite", eliminating cavitation and blow out.
**Especially important in shallow water conditions when planing necessary in 8" to 12" water.
6.) CoBra Stabilizers greatly increase the lateral stability of your boat. This is a natural advantage of CoBra's Stabilizers and is due to the increased surface area created by the plate itself. This added stablility improves both maneuverability, steering control and overall comfort.
Click here for more information.
Q:
What are my payment options?
A:
We gladly accept MasterCard, VISA, Cashiers' Checks, Money Orders, and personal checks (must clear before shipment will be made)
Q:
What is your Return & Exchange Policy?
A:
LIFETIME LIMITED WARRANTY: Should you find any of our products defective, return it to CoBra Marine Company P.O. Box 483 - Grover, MO 63040. CoBra Marine will repair or replace the unit at NO CHARGE. The Purchaser will be responsible for the cost of removal and re-installation as well as packaging, freight, and handling to and from CoBra Marine. (See next Question regarding our Limited Lifetime Warranty)
Q:
How does your Limited Lifetime Warranty work?
A:
Technical sepecifications Limited Lifetime Warranty:
CoBra marine company warrants this product to be free of defects in material and workmanship. This warranty is in effect from the date of purchase and WARRANTED TO THE ORIGINAL PURCHASER ONLY, in accordance with your ORIGNIAL DATED SALES AND PURCHASE RECEIPT, CoBra Marine Company will reference receipt of your mailed / forwarded warranty card registration. This limited warranty is subject to the terms and conditions as follows: CoBra marine Company will repair or replace any unit found defective unless in it's judgement the unit has been damaged through improper use, improper installation, abuse, non-maintenance, negligence, alteration or modification, accidental damage, any damage to coatings or finish arising from installation or use including, but not limited, to fading, cracking, blistering, peeling, scratches, and any damage to the unit resultant from an act of God.
Under the Limited/Express Warranty as stated, CoBra Marine Company shall have no obligation, and there is no other warranty express or implied, regarding the merchantability or fitness of this product for a particular purpose. There are no other warranties expressed or implied for incidental or consequential damages, direct or indirect, regarding injury to person or property, loss of profits, loss of sales, loss of time, or any other incidental or consequential damage or loss from any cause. (Some states may not allow this exclusion of incidental or consequential damages and may not allow a limitaiton on extent of this Warranty. This Limitation may not apply to you.)
Q:
What is the purpose of the center hole of the Stabilizer Plate?
A:
Simply, this "hole" allows needed room for motors equipped with Torque tabs. Motors without these tabs will not be affected in any way from this opening.
Click Here For More Information
Q:
What tools and hardware are required to install my Cobra Marine Stabilizers?
A:
Installation is simple! All that is required is a drill and 1/4" bit. We conveniently have included all necessary hardware with every Stabilizer purchase. Also, diagrams and instructions are supplied with your order. For more information, simply refer to our Instructions Page.
Q:
How do I determine which CoBra Marine Stabilizer(s) will best suit MY boating needs?
What is the purpose of the "Bend" on all of your stabilizers?
A:
The "bend" of 6 degrees has proven to be the optimal counter balance to minimizing "porpoising" of all watercraft. It serves as a sort of "counter balance" when the bow tends to dip up and down. It serves as yet another balancing component of the CoBra Marine Stabilizer, ensuring a more comfortable and smooth ride.
Click Here For Installation Information
Q:
What are the benefits of using the CoBra Marine Stabilizer?
A:
The Benefits of CoBra Marine Stabilizers are too great to be counted. You will be riding much more comfortably at reduced speeds with minimal bow rise... virtually eliminates trim tab use...There is no longer a need to slam down the throttle because with the CoBra Marine Stabilizer you can easily be on plane at 1/4 to 1/2 throttle, at the same time allowing the bow down for full forward vision. They improve facilitating skiers, kneeboards,...out of the water much quicker
Q:
Are CoBra Marine Products currently used by Industry Professionals?
A:
ABSOLUTELY!!! Check out these Professionals: Norm Jorgenson - Professional tunnel Hull Drag racing; Bob Carlson - APBA Tunnel Hull Pro Racing; Woo Daves - Professional Anger; Babe Winkleman - Babe Winkleman productions & Pro; Kevin Van Dam - Professional angler; Greg Horoky - PWT Pro (Professional Walleye Tour); Penny Barryman - 1994 Bass N' Gal Classic Champion; Mark Martin - Professional Walleye; Walt Reynolds - Professional Angler; Capt. rick Bouley - Key West Professional Flats Guide; Todd Bowen - Key West Professional Flat Guide; Jim Hammond - Professional Guide; Captain Dale Apple - Boone County Water Rescue;
